Ultimate FX Loop

$70.00

Granger Amplification is now offering our new high voltage, zero-loss, true-bypass effects loop in kit form. Our Ultimate Effects Loop works perfectly for most vintage Marshall, and Marshall-style amps, as well as many other modern amps, that have extra mounting space in the chassis. Our effects loop is optimized for insertion between the preamp and driver stages. Our low noise, non-clipping, analog effects loop utilizes a discrete, high voltage buffer and a return gain stage. To be the most compatible and easy-to-install effects loop available, we made the mounting requirements simple (4 wires - Power, Ground, Signal In, and Signal Out), and also features internal trim (level) pots that can be accessed directly through the jacks (no chassis removal required to adjust levels) so it doesn't require a lot of drilling for the controls. The footprint is small (3 holes), yet both the send and return levels can be adjusted for nearly any loop requirement. In factory configuration the send stage has 10dB of cut and the return stage has 16dB of gain, for a net gain of 6dB. Low cost stomp boxes work just as well as thousand dollar rackmount effect units. The Send is configured as non-interrupt, so it can be used as a Preamp/Slave Line Out. Can be easily mounted component side up (Send jack on right side), or solder/trace side up (Send on left), with power, ground, and signal terminals clearly marked on both sides. We also offer the option to have the bypass switch mounted to the circuit board (default), or included separately as a panel mount switch, if an alternate mounting location is desired (Select from the dropdown below).

This is THE most versatile effects loop on the market! If you are interested in a custom configuration, just contact us!

Instructions, drilling template, wire leads, and recommended wiring examples are included. Product support is available via email.

NEW! Check out the new installation video to see just how easy it is to install our Ultimate FX Loop!

Board dimensions: 3.30"L x 1.75"W x .875"H Send, Return jacks spaced: 1.5" True Bypass switch centered between jacks (default) Operates from existing B+ supply (200-4000VDC) (2) Power wire leads are 1 ft. sections of 22Ga TopCoat 600V in the following colors: Red, Black (2) Signal wire leads are 1.5 ft. sections of RG-174 shielded cable.

DISCLAIMER: User assumes all risks. Performing these modifications will most likely void the warranty on your amplifier. Working on amps can be deadly if you do not take proper precautions. Read and follow the diagram or instructions very carefully. Basic soldering skills and basic user-supplied tools are required. If you are at all unsure of your ability to perform these modifications STOP and take your amp to a professional to be modified. You can also send your amp to us for modification. Contact us for pricing. DIFFICULTY LEVEL: ADVANCED [Follow safety guidelines for working with electricity. Advanced soldering skills and knowledge of working with AC/DC circuits. Identify all terminals of electronic components using data sheets. Read resistor color codes and capacitor values, as well as identify PNP, NPN, JFET, MOSFET semiconductor devices. Measure and connect high and low voltage AC and DC. Understand advanced working of vacuum tubes. Use all functions of a multimeter. Understand Ohms law and apply to basic and advanced circuits. Work with advanced hand and power tools.]


Add to Cart:

  • Model: UFXLOOPKIT
  • Shipping Weight: 0.75lbs
  • 14 Units in Stock
  • Manufactured by: Granger

Please Choose:




Current Reviews: 1

This product was added to our catalog on Monday 06 August, 2012.

Official PayPal Seal

Your IP Address is: 54.224.197.86
Copyright © 2017 Granger Amplification Custom Shop.

Ads help offset our web hosting expenses. Every click helps up keep our pricing fair and competitive. Thank you.